Type A basement waterproofing also known as tanking, it is an externally or internally applied barrier system applied to the walls and floors of the structure that can withstand ground water from entering the building under pressure. There are numerous products and methods for applying Type A waterproofing systems including sheet membranes, multi-coat renders, crystalline slurries and bitumen based coatings. A thorough assessment of the structure must be carefully assessed at design stage to ensure its suitability. This system requires the structural elements of the building to be strong enough to withstand ground water pressure.
Services
Basement Waterproofing London
Being below ground, basements and cellars are susceptible to groundwater being forced into the structure under pressure. Factors such as type of structure, depth of the structure, the makeup of surrounding soil and location of the structure all play a part in how much dampness or water ingress is experienced by the basement or cellar during the course of its lifetime. The types and levels of basement waterproofing are just as numerous as the causes of dampness and it is essential that all factors are taken into consideration when designing the waterproofing system.
Type A Waterproofing
Type B Waterproofing
Type B waterproofing is an inbuilt characteristic of the actual structure by adding waterproofing additives to the concrete used to form the floors and walls of the structure. Although normally effective in its own right, the joints of the structure are it’s weak spot and as such are susceptible to water penetration. Type B waterproofing is normally backed up by combining type A, C or sometimes both to ensure a watertight system and minimise risk. Type B basement waterproofing is normally specified in newbuild below ground structures.
Type C Waterproofing
Type C waterproofing is essentially a set of dimpled membranes called Cavity Drain Membrane (CDM) installed externally or internally to the walls and floors of the basement structure. A type C basement waterproofing system does not aim to prevent the incoming water to the structure but instead manages it and diverts it into either a pumping chamber or external land drain. This system is suitable for all structure types and is quickly becoming the preferred system for existing cellars and basements that are subject to ground water ingress due to its relatively low risk of defect and ease of installation.
Basement Waterproofing Frequently Asked Questions
What is Basement Waterproofing?
Basement waterproofing, also known as Structural Waterproofing is a Waterproofing system designed to prevent groundwater ingress into the structure under pressure. There are various methods of basement waterproofing and each has its own set of requirements to ensure success.
What is Ground Water?
A different type of fungus altogether, wet rot is most often caused by Coniophora Puteana or Poria Vaillantii. Behaving slightly differently in their unique ways, there are some similarities to their general appearance which means their treatment is similar too. Wet rot tends to prefer timber which has a dampness level of over 50% whereas dry rot can spread well when moisture levels are only 20%.
Wet Rot is less severe than dry rot as it is usually confined to the area of dampness in timber due to its inability to penetrate masonry whereas dry rot can spread across a much wider variety of surfaces.
What is a Water Table?
How long do Basement Waterproofing guarantees last?
How much does Basement Waterproofing cost?
How many Basement Waterproofing systems are there?
What is BS8102(2022)?
How important is it that the Basement Waterproofing is designed by a competent person?
Do I need Basement Waterproofing?
Need a Survey or Consultation?Basement Waterproofing expertise in London
If you’d like to book a site survey, consultation or no-obligation quotation for our dry & wet rot proofing services in London, please click here or call 0208 959 6424.